Teac DR-70D Reference Manual Bedienungsanleitung Seite 1

D01244120ADR-70DLinear PCM Recorder for DSLRReference Manual

10 TASCAM DR-70D2 – Names and Functions of Parts7 Recording statusThese show the recording on/off status of each channel. (See “Setting the channels

TASCAM DR-70D 112 – Names and Functions of PartsUsing menusWe explain how to change recording settings in this example.1. Press the MENU button to op

12 TASCAM DR-70D3 – PreparationPowering the unitPower sourcesThis unit can be powered by four AA batteries, a TASCAM PS-P515U AC adapter (sold separa

TASCAM DR-70D 133 – PreparationUsing USB bus powerConnect the unit to a computer using the included USB cable as shown in the illustration.Connect the

14 TASCAM DR-70D3 – PreparationSetting the date and timeUsing its internal clock, this unit adds the date and time to files when they are recorded.1.

TASCAM DR-70D 153 – PreparationSD card write protection switchesSD cards have protect switches that prevent writing new data to them.If you slide the

16 TASCAM DR-70D3 – PreparationSetting the output gain1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select MONITOR, and

TASCAM DR-70D 173 – PreparationSetting the inputsRecording with the built-in stereo micPoint the built-in stereo mic at the sound source and place the

18 TASCAM DR-70D4 – RecordingThis unit can record sound from external microphones and external audio devices, including CD players.The unit can be se

TASCAM DR-70D 194 – RecordingAdjusting the input levelBefore starting recording, the input level should be adjusted to prevent the recorded sounds or

2 TASCAM DR-70DContents1 – Introduction ...4Features ...

20 TASCAM DR-70D4 – RecordingSetting the recording input sourceUse the INPUT 1/2 and INPUT 3/4 items on the BASIC screen to set the recording input s

TASCAM DR-70D 214 – RecordingUsing phantom powerWhen stopped (and the INPUT1/2 or INPUT3/4 item is set to XLR/TRS on the BASIC screen for the channel

22 TASCAM DR-70D4 – RecordingUsing the limiterWhen the limiter is on, the input gain will adjust automatically in response to the input level, settin

TASCAM DR-70D 234 – RecordingCompensating for mic distancesThis unit can compensate for delays that result from differences in distance between the bu

24 TASCAM DR-70D4 – RecordingRecording (MONO/STEREO/2MIX)Starting recording1. Press the record (0) button to start ordinary recording.When recording

TASCAM DR-70D 254 – RecordingSimultaneously recording two files at different input levels (DUAL REC)This recorder can simultaneously record a second r

26 TASCAM DR-70D4 – RecordingUsing the auto tone functionThe function can be used to automatically add a tone when beginning and ending recordings.By

TASCAM DR-70D 274 – RecordingUsing mid-side microphonesThis unit has a mid-side decoder and can be used to record with a mid-side mic and playback suc

28 TASCAM DR-70D4 – RecordingRecording durationThe table below shows maximum recording times (in hours: minutes) by file format on SD/SDHC/SDXC cards

TASCAM DR-70D 295 – Working with Files and Folders (BROWSE screen)On the BROWSE screen, you can view the contents of the MUSIC Folder, which contains

TASCAM DR-70D 3Contents7 – Connecting with a Computer ...32Transferring files to a computer ...32Transfer

30 TASCAM DR-70D5 – Working with Files and Folders (BROWSE screen)Folder operationsSelect the desired folder on the BROWSE screen and press the DATA

TASCAM DR-70D 316 – PlaybackPlaying recordingsWhen the Home Screen is open and playback is stopped, press the 2/7 button to start playback.NOTEYou can

32 TASCAM DR-70D7 – Connecting with a ComputerBy connecting this unit with a computer using the USB cable, you can transfer audio files on the SD car

TASCAM DR-70D 338 – Settings and InformationViewing informationUse the INFORMATION screen to view various types of infor-mation about the unit.Follow

34 TASCAM DR-70D8 – Settings and InformationSystem SettingsFrom the SYSTEM screen, you can change various settings to optimize the device for your us

TASCAM DR-70D 358 – Settings and InformationSetting the file name formatYou can select the format of names given to files recorded by this unit.1. Pr

36 TASCAM DR-70D9 – Using the REMOTE jackThis unit has a REMOTE jack.You can connect a TASCAM RC-3F footswitch or TASCAM RC-10 wired remote control (

TASCAM DR-70D 3710 – MessagesThe following is a list of the pop-up messages.Refer to this list if one of these pop-up messages appears on the DR-70D a

38 TASCAM DR-70D11 – Troubleshooting 8The unit will not turn on.• Confirm that the batteries are not dead.• Confirm that the batteries are installed

TASCAM DR-70D 3912 – SpecificationsRatings 8Recording mediaSD card (64 MB − 2 GB)SDHC card (4 GB − 32 GB)SDXC card (48 GB − 128 GB) 8Recording/playbac

4 TASCAM DR-70D1 – IntroductionFeaturesThis recorder includes audio inputs and outputs that are suitable for use with digital single-lens reflex (DSL

40 TASCAM DR-70D12 – SpecificationsRequirements for connected computersCheck the TEAC Global Site (http://teac-global.com/) for the latest informatio

TASCAM DR-70D 4112 – SpecificationsRecording 2ch 44.1kHz/16-bit WAV filesAbout 8:45When XLR/TRS input selected (phantom power used)Recording 2ch 44.1k

TEAC CORPORATION http://tascam.jp/Phone: +81-42-356-91431-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/Phone: +1-3

TASCAM DR-70D 51 – IntroductionAbout SD cardsThis unit uses SD cards for recording and playback.You can use 64MB–2GB SD cards, 4GB–32GB SDHC cards and

6 TASCAM DR-70D2 – Names and Functions of PartsFront panel1 Built-in stereo microphoneOmnidirectional stereo electret condenser microphone.2 Front

TASCAM DR-70D 72 – Names and Functions of PartsPress this button during playback or when playback is stopped to skip to the beginning of the next trac

8 TASCAM DR-70D2 – Names and Functions of PartsConnect a TASCAM RC-3F footswitch or TASCAM RC-10 wired remote control (both sold separately) here to

TASCAM DR-70D 92 – Names and Functions of PartsHome Screen1 Recorder operation statusThis icon shows the recorder operation status.Indicator Meaning8