Teac D-02 Bedienungsanleitung PDF herunterladen (Seite 17)

ENGLISH

The sampling frequency of the input audio signal is shown.

When an ES-LINK signal is being received, “ESL1”, “ESL2” or “ESL3”

appears to the right of the input sampling frequency.

Example: 176.4 kHz sampling frequency

Example: ES-LINK signal being received

176.4 kHz sampling frequency

Volume

The volume setting is shown.

Example: –32.5 dB volume setting

Input

The input source is shown.

When an ES-LINK signal is being received, “ESL1”, “ESL2” or “ESL3”

appears to the right of the input source.

Example: DUAL input source

Example: ES-LINK signal being received

DUAL input source

Automatic display off setting

FLaOFF>

***

The fluorescent display can be set to automatically darken after a set

amount of time has elapsed.

The factory default is “30m”.

15m, 30m, 60m

If no operation has occurred for 15, 30 or 60 minutes, the display

automatically turns off.

OFF

The display never darkens automatically.

< If the display is left on with the same indication for a long time,

brightness irregularities can occur. For this reason, we recommend

that you enable automatic display darkening.

DIMMER

DIMMER>

***

Sets the brightness of the display and indicators

The factory default is “3”.

FL Dimmer3

Full brightness

FL Dimmer2

Medium brightness

FL Dimmer1

Minimum brightness

OFF:

The display and indicators are off.

< Set to “0” (OFF), the display and indicators will not light.

< When the display is darkened, pressing the INPUT button, for

example, will cause the display to brighten for just a few seconds.

< Even when set to a value other than “3” (full brightness), error

messages and setting menu indications will appear at full

brightness.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Teac D-02 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Teac D-02